Page 1 of 1
5.12's into a sierra
Posted: Tue Aug 02, 2005 5:03 pm
by jtraf
What has to be done to fit vitara 5.12's into a sierra?
Centers will be welded if that makes a difference at all.
James
Re: 5.12's into a sierra
Posted: Tue Aug 02, 2005 5:05 pm
by greg
jtraf wrote:What has to be done to fit vitara 5.12's into a sierra?
Centers will be welded if that makes a difference at all.
James
Hi james,
there is a very detailed write up to this topic in here somewhere... i recall a fellow from sydney with a coiled rear end coversion did a big write up on it.
cheers
Posted: Wed Aug 03, 2005 12:30 am
by christover1
Posted: Wed Aug 03, 2005 1:54 pm
by bigred
I Just Completed that conv, front will drop straight in and if you are going to weld the rear then all you need is the crown wheel and pinion
Posted: Wed Aug 03, 2005 4:45 pm
by -Mandy-
Grumpy had 5.12's.......both went straight into NT diffs,also had an EZI lokka in the rear.
Posted: Wed Aug 03, 2005 9:49 pm
by bigred
i found it easier to locate a pair of fronts a lot cheaper too