Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

td42 timing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

td42 timing

Post by mav »

what is the best setting for td42 pump timing (turbo and non turbo)???
see ya mav
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Setting the pump timing mark on the factory line gives about 0.32mm plunger lift@TDC. The fact manual describes setting it to give 0.75mm--this is about 6deg BTDC. Ive found at this amount of advance, engine is much noisier than at the fact line, but gives good economy and seems about right for my turbo (SAFARI)

Nick
Top
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

timing

Post by mav »

thanks for the info Woop, i was told just the other day that gu patrols were 0.75 but it was revised to 0.73, but i'll try 0.75 as i've got a safari turbo as well.
see ya mav
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest