Anyone heard of these??
They call their springs Jumboz.....
Just wondering if anyone has heard of em.... good/bad???
ANy one got a web addy???
Apparently they make an 8" spring for the 80 series's
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Allsprings.. Jumboz
Moderators: toaddog, TWISTY, V8Patrol, Moderators
One of my earlier spring sets was from them...they sagged way too quickly and their only soluion was to reset them (at my cost) which resulted in a crappy ride and then they sagged again....absolute waste of money IMHO.....
And yes I dealt only with aldo......
And yes I dealt only with aldo......
Cheers [url=http://www.wooders.com.au]Wooders[/url]
rOd wrote:Ive never bought any of their springs so cant comment on that.
But, I have had some things fitted by them which I supplied (coz I didnt have the tools).
Never again! They damage a few things while fixing (if you could call it that) another.
elaborate
[quote="dazza30875"]whats "FAIL" mean[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
i had a coil made by them i put it in at night
car sat in the driveway drove 10 minutes to work and go out to see my car leaning over at smoko time
the coil snapped somehow in 2 places
lucky it didnt happen while driving round a corner
car sat in the driveway drove 10 minutes to work and go out to see my car leaning over at smoko time
the coil snapped somehow in 2 places
lucky it didnt happen while driving round a corner
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
I've got a set of All Springs Jumboz in my GQ patrol, which have been in there for a couple of years.
I did initially have a few probs with them. For some reason the back right sat low, but this might have been some miscommunication between me and them. I fitted the springs, but they weren't marked, but i'm pretty sure i put the longer one in the FRHS as directed. Anyway, they lengthened the RRHS spring and the car now sits pretty level, probably as good as you would expect with ~6" lift.
Which brings me to a slight warning. I asked for a 4" raised spring and got more like 6", and no it didn't sag to 4". Other people have said this too, so just be a little cautious and clearly discuss your requirements.
Anyway, i reckon they work pretty well, they don't sag under a reasonable weight and they flex all the way to the bump stop and then right out too, and ride pretty comfotably, which i reckon seems to strike a pretty good compromise. So they must be doing something right. Their slight inaccuracy might have more to do with their lower production volumes than other like kings or dobbinsons.
Can't really help you with their fitting service. I fitted mine, but they were supposed to pull out the right rear, but i kind of did most of it using their forklift.
Hope that helps you a bit.
I did initially have a few probs with them. For some reason the back right sat low, but this might have been some miscommunication between me and them. I fitted the springs, but they weren't marked, but i'm pretty sure i put the longer one in the FRHS as directed. Anyway, they lengthened the RRHS spring and the car now sits pretty level, probably as good as you would expect with ~6" lift.
Which brings me to a slight warning. I asked for a 4" raised spring and got more like 6", and no it didn't sag to 4". Other people have said this too, so just be a little cautious and clearly discuss your requirements.
Anyway, i reckon they work pretty well, they don't sag under a reasonable weight and they flex all the way to the bump stop and then right out too, and ride pretty comfotably, which i reckon seems to strike a pretty good compromise. So they must be doing something right. Their slight inaccuracy might have more to do with their lower production volumes than other like kings or dobbinsons.
Can't really help you with their fitting service. I fitted mine, but they were supposed to pull out the right rear, but i kind of did most of it using their forklift.
Hope that helps you a bit.
Who is online
Users browsing this forum: No registered users and 4 guests