mongrels and simex tubes PSI
Posted: Sat Aug 06, 2005 7:07 pm
hey guys what PSI have people been running mongrels at (with tubes in) without losing a bead?
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
mongrels and simex tubes PSI
Page 1 of 1
Posted: Sat Aug 06, 2005 7:37 pm
With tubes 4psi
Posted: Sat Aug 06, 2005 8:22 pm
My Sierra has got 32" Mongrels with tubes front and tubeless rear ..normally run 10 offroad, but have recently been running 8...will probably run less after power steer.
I got frequent bead leaks on front, (different carcass brand to rear) hence the tubes in da front. But never lost the bead, even when almost flat.
Will probably tube the rear if I happy.
christover
I got frequent bead leaks on front, (different carcass brand to rear) hence the tubes in da front. But never lost the bead, even when almost flat.
Will probably tube the rear if I happy.
christover
Posted: Sat Aug 06, 2005 11:28 pm
I run 32" Mongrels without tubes at 5 - 7 PSI regularly and don't have a problem with beads leaking.
Posted: Sun Aug 07, 2005 8:24 am
That could be taken in more than one waychristover1 wrote: Will probably tube the rear if I happy.
You might want to take into consideration the weight of your vehicle too. The heavier it is the more chance you will lose a bead for a given PSI.
Posted: Sun Aug 07, 2005 10:18 am
Posted: Sun Aug 07, 2005 1:55 pm
I run 31 simex centipedes with tubes. I usually run at 5psi and have never lost a bead.
Simon..
Simon..