Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Difflock failure survey

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 347
Joined: Sat Mar 08, 2003 4:22 pm
Location: Canberra, ACT

Difflock failure survey

Post by Gordo »

Hi, I''m not trying to start a difflock design war! We all know all lockers have they're merits and drawbacks.

I am purely curious to get an idea how many and the type of loss of difflocker function events (ie not necessarily terminal) you are *personally* aware of.

Please include events that indirectly caused the event (eg diff cover damaged, oil lost, difflock ceased functioning)

This will help owners and potential owners of lockers become aware of the most common ailments affecting one of the most popular offroad accessory upgrades performed and maybe plan ahead for trail-side repairs.

Please don't bother mentioning givens such as the lockers were used in comps or that more popular brands will have a greater number of failures, etc

This topic will also be posted on Ausjeepoffroad so please submit to only one board to aid accuracy.

Once results are compiled I'll post the results for everyone's info.

My experience :

airlockers :
1 mechanical (grenaded),
3 electrical (1 fuse, 1 air comp wiring, 1 switch)

Detroit SofLocker (2) :
Still alive

thanks :)
Last edited by Gordo on Fri Jun 27, 2003 3:04 pm, edited 1 time in total.
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

Air locker.

The 4 cap screws the hold the 2 housing pieces together failed. 2 sheared 2 stripped the threads. Diff lock was fitted to the front of an 80 and was originally on a hilux. 7 years service and no reason for failure.

Fixed locker buy drilling out 4 holes and retapping to 3/8 (a bit more than that involved). On the plus it worked fine yesterday. :P

Mates locker helped him fix it.
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Post by Bodge »

Goodsy - PM with the details of your fix - I think I have the same problem and was told it was a write off....
The Lucas motto: "Get home before dark."
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

Broken lockrite, seems cross shaft had snapped and shear pins broke the housings. When stripped down pin holes were flogged out and sides of housing where cross shaft goes through was worn down. Its been in for @ 3 years and @ 150k
Posts: 22
Joined: Fri Dec 06, 2002 12:34 pm
Location: Sydney

Post by Zookymatt »

Lockright: snapped shear pins on 4 different occasions, normally as a result of a CV joint breaking

Detroit: No breakage

Welded: No breakage

Regards,
Matt.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

I snapped a pinion and this damaged the outer carrier of the airlocker. with no pinion i lost drive also ;)
:lol: :lol:

Very happy with airlockers though. good stong product. The electrical system and compressors are average and the switches are poor. but the diff centre itself is AWESOME!
hands and mums dont count!!!
Posts: 347
Joined: Sat Mar 08, 2003 4:22 pm
Location: Canberra, ACT

Post by Gordo »

So far so good...13 failures for all sorts of designs and reasons.

The spreadsheet's coming along nicely.

Keep it up.

PS BJ - What have u got against goats ?? :p They're VERY nice...
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

ARB rear locker installed 18 months ago.

-leaking O ring seal after 3 months (replaced under warranty)

-ARB compressor, blown fuse and numerous air leaks (fixed these myself)

-Detroit front locker installed 2 months ago- no probs so far.
I just luv my "clacker Jabber"
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Air Lockers Front and Rear (Front installed about 3 months after rear).

1. Oil (only a few drops) came up air line and caused solinoid to "stay open" which meant that the compressor would always run (even when car was turned off). Took it to ARB and they pumped some air down the lines - problem solved.

2. Air Pressure in the compressor pushed out the Rubber seal in the compressor. Couldn't pump up tyres. Took it to ARB, they replaced it on the spot.

ARB have done all fixes for free, on the spot for me. Very happy with everything else about the lockers.

No issues with the diffs, just the compressor and air lines.
DMA Founding Member #1 - Now Retired
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Exactly as I was saying the Airlocker itself is a stout and reliable unit, whereas the peripherals attached to it are somewhat cheap and unreliable.
hands and mums dont count!!!
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yes BJ and the stupid sized fittings they use.....................
Friggin 5mm airline no-one uses that and those stupid bulkhead compression fittings. We have found an adaptor that converts the compression fitting thread to a female BSP thread (after removing the external compression fitting cap). Then you can screw in a quick connect Festo type airline fitting to take a 3/16" airline. Much better IMHO then you can carry a more common size Festo airline and fittings as spares :)
We use heaps of this sized Festo stuff at work ;)
I just luv my "clacker Jabber"
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

airlockers
the aircompressor shat its self after 6 months took ARB in townsville 5 weeks to get it fixed ... not impressed with them
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i bought the car in Jan, The compressor and airlocker have been in there since 1992. THe locker functions fine, but i do have to say the the comps getting way long in the tooth, i have a new ARB comp what will be getting installed this weekend so well see how she goes after that hey.

Shawn
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Had no probs with my airlokka that i had in da zook although i it did twist sum axles nicely :roll: ......................

Compressor was fine now fitted to the mav has slight leak (didnt use any sealant wen fittin pressure sensor) as it has to be removed soon anyway

As for my latest pair there sweet they look real nice sittin beside my 37"s trans gears and snorkel in my house :roll: :arrow: :cry:
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

F & R ARB's in Maverick wagon, had them in about three years.

only faults in that time were:
1. Slight oil film on inside of bonnet where bulkhead fittings exhaust pressure (rectified by shop that installed them)

2. poor quality fuse holder (inline glass) for compressor - shop that fitted system supplied a new blade fuse holder and fixed it myself.

3. air seal on compressor tank failed on disassembly - not really a fault of the product - these seals are pretty cheap anyway I think. I just sealed it back up with gasket sealant.

I'm quite meticulous about my maintenance, so the reliability has probably been in my favour anyway. I've never owned any other type of locker so I have no experience with them, only opinions (which I'll keep to myself)
Built, not bought.
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

detroit locker in the rear of the 80 and true track in the front(same as torzan)...broken everything else around them...lockers are still fine ! Appart from the nerky little driving side effects...there fine :roll:
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Detriot Locker in Daihatsu Rocky. Imported from USA and would not unlock from new. Replaced under warrenty. Replacement has been in place for about 7 years with no problems whatsoever. Front now has Detriot Locker fitted last July. No problems so far, apart from usual handling quirks. Ya learn to live with these.
Mud makes excellent toothpaste.
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

i love my air locker no problems yet

TOUCH WOOD :lol:
HOOLAY Wish i could buy boggers for my DH bike
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i have broken 2 detroits, the pins in both times.


NICK
TECH SCREW GURU
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Lokka Lockright, sheared the 4 pins off after about 5 months of driving, it was already showing very bad wear signs aswell!

The rear is welded and never had a problem!
:)
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Only problem with my air locker has been a broken air line when it rubbed on the body where it went through the floor.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

true track front and ARB rear. Only had one problem with the rear was when the air line was touching on the exhaust and melted a hole in it, other than that no probs so far. Both have been installed for approx 4 months.
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

POS wrote:Lokka Lockright, sheared the 4 pins off after about 5 months of driving, it was already showing very bad wear signs aswell!

The rear is welded and never had a problem!
:)


So what are you gonna do ? Are you wanting your computer back ??

:D
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

I have ARBs front and rear. I think that they are about the oldest ones around (not sure of their exact age :roll: )

Only drama I have had is suspect wiring (mine, not ARBs :oops: ) A good river crossing or the like and they seem to work fine again ;)

The switches are "custom" jobs. The "H" is for the horn !! This allows me to toggle the front locker on and off using the horn - lets me keep both hands on the wheel :cool: :cool:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

welded rear.... no probs
arb front .... no probs
new arb for rear ... probs .... it still in the box and not the car
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Rear Detroit .. broken pings and springs in the Zook
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 75
Joined: Mon May 26, 2003 4:27 pm
Location: Jakarta, Indonesia

Post by JavaJeep »

Dana 25 10 spline - Lockright - no problem, a pig to drive in heavy mud with no power steering

Dana 44 19 spline rear - Detroit 'No Spin' locker, comes in with a bang sometimes when it was new 18 mths ago but no probs.

Pretty hard to break them with 90 hp [optimistic]
" I LOVE the smell of napalmed 'Cruzers in the morning. . "

1944/46 MB/CJ2a 'FrankenJeep' waterproofed F-134, Simex 32x9.5x15 Extreme Trekkers, lifted, D25 LockRight locker front, D44 19 spline full Detroit Locker rear
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

lockers

Post by duncan »

Just broke my first CV on a 92 GQ wagon drivers side runing 35 centapeeds running a 4x4 systems loka broke 2 of the small pins and bent and fractored the other 2 showing some signs of wear on the sides were the cross shaft goes through had mates running air lockers all had failers with the air or electrical side of things one had a air leak on the diff lock presured his diff up and spewed oil out of the swivel hubs
Posts: 751
Joined: Wed May 21, 2003 11:33 am
Location: Melbourne, AUS

Post by FireTruck »

I can also back up the tales of woe with ARB wiring and compressors... on my f/r ARB's...

1. Solenoid died = no compressor = no lockers
2. Inline glass fuse blew (for compressor) = no compressor = no lockers
3. Intermittant compressor drop out = no lockers

Replaced the in line fuse with a blade fuse holder - no idea why they don't do this in the first place.

Anyway, enough failures to switch to Detroits f/r... haven't had the detroits in for long yet, so hard to comment apart from saying 'no failures yet'.
www.TeamFireBug.com

Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

In the old ZOOK
ARB front Fuse holder as with others numerous CV no Locker probs.

Lincoln rear one broken axle.

New ZOOK

Lincolns front and rear no probs, Broke one axle which was my fault. :D
OVERKILL ENGINEERING
www.overkill4x4.com
Post Reply

Who is online

Users browsing this forum: No registered users and 117 guests