Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

"O" rings

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

"O" rings

Post by rOd »

Where can I get an "O" ring that is 100mm dia. X .5-1mm thick

I need it for the distributor cover (inside dizzy cap) of my GQ.

Can I use a sealant (silicon) instead?

Nissan wants $48 for it!

Cheers,

Rod
Dont expect mere proof to sway my opinion.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Any bearing shop will have it. Will be less than $2.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

try a farm spray suplier such as HARDY PUMPS AND SPRAYERS perhaps! im in the weed and pest control buisness here in sydney and often get stuff from them to use on me familybus! goodluck dude :lol:
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

Cheers guys will try the bearing shop and also the pump shop.

Rod
Dont expect mere proof to sway my opinion.
Top
Posts: 827
Joined: Thu Apr 28, 2005 7:52 pm

Post by F'n_Rover »

you can also get straight blank lengths. cut and loktite to form ring.
Ex-Army - SeriesIII -186s - NP435 - Maxi rear - megasquirt coilpack ignition - AM FM radio with 2 X speakers
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Pool spares shops / plumbing.
Pool shops are the best for all that stuff, they have everything.
Land Rover Discovery - GQ conversion underway
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

DaveS3 wrote:Pool spares shops / plumbing.
Pool shops are the best for all that stuff, they have everything.
Well I better get my butt 2mins up the road to check out my local pool shop!
Dont expect mere proof to sway my opinion.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Re: "O" rings

Post by Bush65 »

rOd wrote:Where can I get an "O" ring that is 100mm dia. X .5-1mm thick

I need it for the distributor cover (inside dizzy cap) of my GQ.

Can I use a sealant (silicon) instead?

Nissan wants $48 for it!

Cheers,

Rod
The size of O-rings is designated as the inside diameter x the thickness.
John
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

if you have trouble finidng it i can try our o ring / seals supplier
www.overkill4x4.com
ph 94766137
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

Q-Fit are the people for O rings.

Theyve got every conceivable O ring you can think of.

Cost me $2.60 for two 100mm x 2mm O rings.

And to think Nissan wanted $48 for the same two rings! :finger:

Rod
Dont expect mere proof to sway my opinion.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests