Page 1 of 1
"O" rings
Posted: Wed Aug 17, 2005 8:05 pm
by rOd
Where can I get an "O" ring that is 100mm dia. X .5-1mm thick
I need it for the distributor cover (inside dizzy cap) of my GQ.
Can I use a sealant (silicon) instead?
Nissan wants $48 for it!
Cheers,
Rod
Posted: Wed Aug 17, 2005 8:10 pm
by ISUZUROVER
Any bearing shop will have it. Will be less than $2.
Posted: Wed Aug 17, 2005 8:20 pm
by familybus
try a farm spray suplier such as HARDY PUMPS AND SPRAYERS perhaps! im in the weed and pest control buisness here in sydney and often get stuff from them to use on me familybus! goodluck dude
Posted: Wed Aug 17, 2005 8:24 pm
by rOd
Cheers guys will try the bearing shop and also the pump shop.
Rod
Posted: Wed Aug 17, 2005 8:26 pm
by F'n_Rover
you can also get straight blank lengths. cut and loktite to form ring.
Posted: Wed Aug 17, 2005 8:28 pm
by DaveS3
Pool spares shops / plumbing.
Pool shops are the best for all that stuff, they have everything.
Posted: Wed Aug 17, 2005 8:34 pm
by rOd
DaveS3 wrote:Pool spares shops / plumbing.
Pool shops are the best for all that stuff, they have everything.
Well I better get my butt 2mins up the road to check out my local pool shop!
Re: "O" rings
Posted: Wed Aug 17, 2005 10:10 pm
by Bush65
rOd wrote:Where can I get an "O" ring that is 100mm dia. X .5-1mm thick
I need it for the distributor cover (inside dizzy cap) of my GQ.
Can I use a sealant (silicon) instead?
Nissan wants $48 for it!
Cheers,
Rod
The size of O-rings is designated as the inside diameter x the thickness.
Posted: Wed Aug 17, 2005 10:38 pm
by spazbot
if you have trouble finidng it i can try our o ring / seals supplier
Posted: Fri Aug 19, 2005 3:27 pm
by rOd
Q-Fit are the people for O rings.
Theyve got every conceivable O ring you can think of.
Cost me $2.60 for two 100mm x 2mm O rings.
And to think Nissan wanted $48 for the same two rings!
Rod