Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox change... hilux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 144
Joined: Wed Aug 27, 2003 1:13 pm
Location: kinglake

gearbox change... hilux

Post by shorty.mqute »

fellas gona change me gearbox tomorrow, just wonderin wat to look out for?? or is it pretty staigt foward??

cheers
ours is not to ask why, but to do or die!
Top
Posts: 27
Joined: Fri Aug 12, 2005 7:36 pm

Post by sarg »

Pre IFS model,easy. IFS model= sway bar is a pain in the ass,right in the way of the bell housing while pulling box rearwards to clear clutch. Have to turn box to clear it
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

all i did(customhilux)hehehe,

is drain the oil,
support the gearbox and motor, then undo all the bolts on the bellhousing, then i removed the crossmember, took the drive shaft and tail shaft off,

slide the jack holding the gear box backwards to remove the bellhousing off the dowel pins, then lowered the jack,

i took the gearbox and transfre off in one hit,

note, i'm drinking and have hijacked ice's name.

but all tech is correct for removing the gearbox.
xxxx wrote:
:bad-words: :snipersmile:
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 5 guests