Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rotating rocker cover breather on TD42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 109
Joined: Thu Aug 26, 2004 9:45 pm
Location: SE Melbourne, Australia

Contact:
Contact rlaxton

Rotating rocker cover breather on TD42

Post by rlaxton »

Hi All,

I have totally redone the inlet piping on my GQ TD42 to allow for the installation of a Liberty water-air intercooler. The only bit left to do is to plumb the rocker cover breather back to the inlet pipe before the turbo.

Does anyone know whether the breather valve thingy on top of the rocker cover can be rotated so that the breather line can be shorter and straighter? Ideally I would like it to be pointing to the pipe from my new airbox to the turbo.

Thanks,

Richard.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Rotating rocker cover breather on TD42

Post by bogged »

rlaxton wrote:Hi All,

I have totally redone the inlet piping on my GQ TD42 to allow for the installation of a Liberty water-air intercooler. The only bit left to do is to plumb the rocker cover breather back to the inlet pipe before the turbo.

Does anyone know whether the breather valve thingy on top of the rocker cover can be rotated so that the breather line can be shorter and straighter? Ideally I would like it to be pointing to the pipe from my new airbox to the turbo..
no idea but I have a spare cover at home you can have if you wanna play.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests