Bundera Wheelbase Length?

Post by **bj on roids** » Thu Jul 03, 2003 9:06 am

Anyone got a WB on these things?

Post by **BUNDERA** » Thu Jul 03, 2003 11:56 am

tell me how to measure it and I will get the details for you.

Post by **RUFF** » Thu Jul 03, 2003 6:29 pm

Measure from the leading edge of your front wheel to the leading edge of your rear wheel.

Post by **Area54** » Fri Jul 04, 2003 7:44 am

RUFF wrote:Measure from the leading edge of your front wheel to the leading edge of your rear wheel.

The correct measurement is from the centre of the wheel hubs front and rear.

Post by **RUFF** » Fri Jul 04, 2003 7:56 am

Yes but from leading edge to leading edge is easier if the wheel has a big offset and this method will still give the correct measurment. As long as both front and rear tires are the same diameter.

Post by **bj on roids** » Fri Jul 04, 2003 9:00 am

RUFF wrote:Yes but from leading edge to leading edge is easier if the wheel has a big offset and this method will still give the correct measurment. As long as both front and rear tires are the same diameter.

that is correct

just make sure you are steered straight ahead.....

mm or inches is okay!

Post by **BUNDERA** » Fri Jul 04, 2003 3:19 pm

Toyota Bundera 1984 - 1989

loa: 346mm, width: 1690mm, wheelbase: 2310mm (90") track: 1425mm/1420mm, grnd clearance: 230mm turning radius: 6.5m (kerb)

petrol: (RJ70...)
22R 2367cc petrol 4cyls 2-valves/cyl sohc
bore: 92mm, stroke: 89mm, c.r.: 9.0:1
power: 105 HP at 4800rpm, torque: 136 Ft-Lb at 2800rpm

diesel: (LJ70...)
2L 2446cc diesel 4cyls 2-valves/cyl sohc
bore: 92mm, stroke: 92mm, c.r.: 22.3:1
power: 72 HP at 4000rpm, torque: 115 Ft-Lb at 2200rpm

2L-T 2446cc turbo diesel 4cyls 2-valves/cyl sohc
bore: 92mm, stroke: 92mm, c.r.: 20.0:1
power: 86 HP at 4000rpm, torque: 139 Ft-Lb at 2400rpm
transmission: 5m (G52 or R150F in turbo model) gearbox, part-time 4WD, 2-speed transfer case.

suspension: live-coil/live-coil, brakes: disc/drum

Note: dimensions given for hard-top.

Hope this helps mate!

Regards,
Nick

Post by **BUNDERA** » Fri Jul 04, 2003 3:21 pm

thougt I would add the awesome power output figures on the 22r aswell!!

Post by **bj on roids** » Fri Jul 04, 2003 3:46 pm

BUNDERA wrote:thougt I would add the awesome power output figures on the 22r aswell!!

Thanks champ. Thats pretty much exactly what I was after.... Now to get one for under $1000 :(

They are Horsepower machines obviously :twisted:

Post by **BUNDERA** » Fri Jul 04, 2003 4:57 pm

you should be able to get one with a fukd engine and diffs for that. I did see one for sale for $1100 in qld several months ago....it was stuffed obviously but body was ok!

Are you doing a bundy buildup?

I was tempted to boost the hp of the 22r specs up :cool:

Not a problem, if there are any other bits of info u need just give us a shout.

Nick

Post by **bj on roids** » Sat Jul 05, 2003 9:36 am

thanks champ!!!

if you see another one for sale for that sort of money, rolled or whatever, destroyed motor, etc. Let me know via PM or email.. thanks... It will be over the next year or so.

Post by **BUNDERA** » Sat Jul 05, 2003 11:30 am

will do.

Post by **Damo** » Sat Jul 05, 2003 1:03 pm

Shoulda kept the 3B and put that in one

Post by **bj on roids** » Mon Jul 07, 2003 7:33 am

Damo wrote:Shoulda kept the 3B and put that in one

ive still got it :twisted:

turbo'ed and all.

Outer Limits 4x4 Board

Bundera Wheelbase Length?

Bundera Wheelbase Length?

Who is online