Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
just drill the holes down to your BL height. If you cant drill the bottom one down any more, weld a bit of flat plate on. I know that works for a GQ TJM bar.
dumbdunce wrote:chop chop weld weld, it's the only way.
i used to work under a crazy swiss engineer that used to say this all the time, he would stand there with a ferrel smoke that just stunk (i smoke)
and stand there puff after puff thinking about how to fix the problem then while pointing with his smoke he would say "cut cut weld weld" in a very thick accent, the thing is he would never actually point at anything we were working on, and i dont think i herd him say any thing else.
the things you have to go through when you are working on a mine site
Stu
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
