Guys
In the coming weeks I am doing a full going over of the front end on the Triton.
New Ball Joints, Bearings, Bushes, Break Pads, Machine disks, Re-index Torsion bars and maybe cvs and shocks.
Probably con the keys to my brother in-laws workshop for the job. Unfortunately I don't have a vehicle hoist at home
At the same time I will do a 2" body lift in prep for 35's
What I was thinking was it would be a good time to take photos of each job to post as manuals on the forum
Anybody in Sydney want to volunteer to come along and help with taking photos and writing notes. Workshop is at Ingelburn near Campbelltown
Start Sat arvo Finish Sunday night
Can't guarantee you won't get your hands dirty but can guarantee a beer or two or three or four.......
Cheers
Wayne
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need help with doing the front end - Sydney
Moderator: -Scott-
Need help with doing the front end - Sydney
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Who is online
Users browsing this forum: No registered users and 0 guests