Page 1 of 1
Mav Factory diff lock ratios
Posted: Sat Sep 03, 2005 3:46 pm
by bulldogy
Guys have just got the new mav and it has a factory diff lock in the rear 4.11 ratio i think.
I want to go to 35s and the right ratio i want is 4.62 what i need to know is the ring gear from a factory LSD 4.62 rear going to fit on the Factory 4.1 diff lock?
If not can you get 4.62s to fit the factory diff lock?
Thanks Guys
Dave
Posted: Sat Sep 03, 2005 3:49 pm
by Adam GQ
i think the gears are 3.9s for the factory lockers
Posted: Sat Sep 03, 2005 3:53 pm
by bulldogy
The code on the plate is HG41 what is that ratio and are the gears interchangeable between the factory locker and the LSD ?
Thanks for a quick reply
..
Posted: Sat Sep 03, 2005 4:12 pm
by JemmyBubbles
Heck yes they are...
Posted: Sat Sep 03, 2005 4:22 pm
by beretta
Mines HG41 too and as far as I know that means 4.11's or 4.10's,a nyone know for sure?
Posted: Sat Sep 03, 2005 4:29 pm
by bulldogy
So Jemmy
The rear LSD 4.6 ring gears will fit my factory lockers is that what you meant .
Had a wrecker say that the rear LSD gears wont fit the factory rear locker
He has me farkin confused and i cant find info anywhere
Thanks
Posted: Sat Sep 03, 2005 5:48 pm
by Beastmavster
Mine is 4.11 and Locker
Posted: Sat Sep 03, 2005 6:42 pm
by Hobbz
Mine are 4.6 and fact. locker ...
Posted: Sat Sep 03, 2005 7:24 pm
by bulldogy
So does anyone know if the factory locker uses the same ring Gear as the LSD?
Posted: Sat Sep 03, 2005 8:35 pm
by Adam GQ
i got a factory loka out of a 4.2 litre manual patrol with hg41 (4.11) on id tag and the loka had 3.9 ratio
Posted: Sun Sep 04, 2005 3:31 pm
by bulldogy
Some 1 must know ?????? if they are the same ring gears for the LSD and factory Diff lock???
Help
Posted: Sun Sep 04, 2005 6:12 pm
by Beastmavster
R&P would be the same. Only way to know for sure is to ask your Nissan dealer but i'm 99.999999% sure that they didnt make a special "factory locker" 4.1 diff and a "lsd only" 4.1 diff and a "no locker" 4.1 diff.
Yeah..
Posted: Sun Sep 04, 2005 6:29 pm
by JemmyBubbles
Nissan will try and tell you there is.. but in reality there isn't... GQ r & p is GQ r & p and thats that. So yeah get a wrecked RX 2.8td GQ rip the ring and pinion of the centres and wack em on yours and away you go..
I don't know though if you can fit GU r & p ??
Posted: Sun Sep 04, 2005 9:22 pm
by bulldogy
Thanks Guys i will go buy the 2.8 4.6 centres and whack the gears on.
May ring nissan and just chek the ring gear part # for a 4.11 lsd is the same ring gear # used for the factory locker.
Will post and let evry1 know so no1 will have to ask again.
Thanks Again guys