Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco II with ACE spring lift

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Disco II with ACE spring lift

Post by Maggot4x4 »

Seeing we are moving to the Fraser Coast next month, we hope to be doing some more touring, so we are on the lookout for a TD5 Disco II Auto.

What I want to know is, if you do a 2" lift to them and they run ACE, is there any problems you encounter? I know you need to relocate the airbag height sensor, but is there any other probs?

Also, I was reading that if you chip them (ala Bruce Davis) you need to get the ACE sensor re-calibrated, do they do this at the time they chip them or is it not really needed?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 145
Joined: Fri Dec 19, 2003 2:35 pm

Post by Maxtd5def »

G'day Ash,

Join the Oz D2 Yahoo group. Its a very active forum. Really useful, and all your answers will be there.

Regards
Max P
Stereo by Simex!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Maxtd5def wrote:G'day Ash,

Join the Oz D2 Yahoo group. Its a very active forum. Really useful, and all your answers will be there.

Regards
Max P
Hi Max,

do you have the link?

Cheers
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

try

www.aud2.com
or
www.disco2.com

hth
Mick
TD5 96 Discovery UTE.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Thanx :D
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 172
Joined: Thu Nov 25, 2004 11:21 am
Location: Gold Coast

Re: Disco II with ACE spring lift

Post by Mick G »

Maggot4x4 wrote: What I want to know is, if you do a 2" lift to them and they run ACE, is there any problems you encounter? I know you need to relocate the airbag height sensor, but is there any other probs?

Also, I was reading that if you chip them (ala Bruce Davis) you need to get the ACE sensor re-calibrated, do they do this at the time they chip them or is it not really needed?
Hi Maggot4x4

Zero problems with a 2" lift on the ACE so far with mine. I also have the Bruce Davis Chip and to my knowledge nothing extra was done with regards the ACE sensor re-calibration. Both mods simply fitted and worked straight away without affecting any other system in the car.

Hope this helps and good luck with the TD5, great machine and depending on what year you get, re-engage the CDL as this will be your single best improvement to an already very capable beast, I have the AMV kit and it works very well.

Mick
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 7 guests