We have major issues with a front tailshaft out of our 4 speed 82 mod 60 series. We replaced the box and cleaned the shaft while it was out and i think we have done somethin...terribly wrong.
it shakes and vibrates badly. it is one of those double joint type shafts,
Do we have it the wrong way round?? Does that double joint bit go at the transfer end or the diff (front) end
someone told us (after we had it out and in again) that we should mark it in as many spots possibe to make sure it goes in right....ooops too late
What have we done, and more importantly, Can we fix it?
Any help appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 Series Tailshaft HELP
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 2 guests