Page 1 of 1
Ask nick
Posted: Fri Sep 16, 2005 4:12 pm
by bad_religion_au
as requested by dumbdunce.
nick parts geek
...
can you give me a definitive answer to which points my 1976 fj40 distributer should be running... the ones reccomended by bosch are too big, and also don't have the post that the moving point swivels off
Posted: Fri Sep 16, 2005 11:41 pm
by dumbdunce
where can I get factory cupholders for a 1977 Stout ute?
Posted: Sat Sep 17, 2005 6:24 pm
by dirty harry
there are to sets to suit a2f motor GD207 and GD202 i think you have be given GD207 so take them back and ask for the others and they are listed in the bosch book i had a look today. and then find a better spare parts shop
Posted: Sat Sep 17, 2005 9:23 pm
by bad_religion_au
dirty harry wrote:there are to sets to suit a2f motor GD207 and GD202 i think you have be given GD207 so take them back and ask for the others and they are listed in the bosch book i had a look today. and then find a better spare parts shop
how about condensors? is there two different condensors?
Posted: Mon Sep 19, 2005 6:31 pm
by dirty harry
no not for the 2f GD111 is the condensor and GD507 is the rotor button and GD514 for the disy cap
Posted: Wed Sep 21, 2005 1:39 pm
by bad_religion_au
dirty harry wrote:no not for the 2f GD111 is the condensor and GD507 is the rotor button and GD514 for the disy cap
well then i'm stumped.. the condenser i was sold (the GD111) didn't work in my dizzy... i ended up putting back in the old one and it worked perfectly...