Done deal, I just bolted an NP231 from a 98 TJ to a KM148. Problem is, the long input gear on the 98 touched the Governor in the KM148, which means the med length NP231 shown to be in the 93-95 ZJs and the short input geared NP231's in the 94 and back YJs and XJs will fit perfect. No spline play, bolts up perfect. Sorry I didn't have a camara w/ me.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Np231 into Pajero yes!
Moderator: -Scott-
Np231 into Pajero yes!
FIgured i'd let you guys know the latest info
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
ok any 23 spline jeep np231 with the med or short length input shaft will work on the km148 auto here in the US this auto was used from 87-93 in 90 they made it a lockup and in 92 in the gen 2 it got a super select transfer case. Ok the fact is now its not just the np231 that will bolt on anything like an atlas that is avalible for these jeep transfer cases will work with a Pajero np231's come stock with 2.72:1 low range and have a slip yok elim kit avalible and a 4:1 low range avalible aswell.
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
here's a link so you can catch up if your still lost.
http://www.4x4wire.com/forums/showflat. ... 14&fpart=1
http://www.4x4wire.com/forums/showflat. ... 14&fpart=1
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
Yeah I remember when Curtis did this and posted a pic.
It was very close indeed and the feeling was a short or medium input gear would do it (his had the long input gear).
The problem is it won't work for the 5sp (different size/spline potput shaft) or the 3.5 V6 auto's.
A good upgrade but Jeep parts aren't cheap over here though not like in the US.
I reckon it would cost pretty close to installing 2.85's but you would have the option of the 4:1 and a slip yoke eliminator kit.
It was very close indeed and the feeling was a short or medium input gear would do it (his had the long input gear).
The problem is it won't work for the 5sp (different size/spline potput shaft) or the 3.5 V6 auto's.
A good upgrade but Jeep parts aren't cheap over here though not like in the US.
I reckon it would cost pretty close to installing 2.85's but you would have the option of the 4:1 and a slip yoke eliminator kit.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 1 guest