Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fj40 track width

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 55
Joined: Mon Jul 19, 2004 8:31 pm
Location: Toowoomba

Fj40 track width

Post by Mudrat »

G'day everyone. i recently did the disk brake install on the front of my 40. The discs and swivel hubs etc all came off a 60 series. The front diff now appears to be approx 1 - 2" wider each side then the rear diff, ie different track between front and rear now. My question therefore is, can i just leave as is or should i put some wheel spacers on the rear to widen its track. I also so a different set of offset rims that could be put on front or back to even it out. Thoughts and or suggestions would be much appreciated

Cheers
Go it or blow it
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

I think that is normal. The factory 40 series front width is 57" from wheel mount surface (WMS) to WMS and the rear is 55". 60 series disc brake conversion shouldn't really increase your track width.

Dave
Top
Posts: 55
Joined: Mon Jul 19, 2004 8:31 pm
Location: Toowoomba

Post by Mudrat »

Thanks for that.

cheers
Go it or blow it
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

beanz, ahhhh that makes sense.

i have looked at mine a heap of times and wondered the same thing...
that explains alot, but i was wondering why it still felt normal.

CHEERS
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests