Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gu (ST) Factory flare repair

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Gu (ST) Factory flare repair

Post by Slug »

Picked up a howling great stick while bush bashing the other day and popped a few of the locating lugs off the inside of the flare. Anyone seen them done or repaired these themselves ? I had a similar problem with my GQ flare and the crappy plastic they made them out of wouldn't take glue or fibreglass and the plastic welder said no way as well :(

Would be a shame to have to fork out for another simply because of a few lousy plastic lugs :shock:

Ideas anyone ?

Daniel
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Broke some from a front flare on a GU, glued them on with Loctite 380. It took a while for it to set but once dry it has never caused a problem.

Cheers
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

we ripped a couple of mounts off the inside of the GU flare, we have a panel beater Plastic weld them back on, he even did it for free,
Top
Posts: 27
Joined: Wed Oct 12, 2005 8:05 pm

Post by Big Boots »

If the mounts are still ok the clips can be bought throuhg nissan separatly. Other than that loctite or sikaflex and cross your fingers.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest