Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nf pajero lift

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 13
Joined: Tue Oct 18, 2005 6:08 pm

nf pajero lift

Post by sx4wdc »

hey everyone i no people have posted this topic before but i would like to no how high i could lift a 89 pajero and the price and how much i would benefit in more wheel travel i would get by trimming the bump stops

cheers
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Well you can wind up the front Torsion bar (others can advise better for how high), and then get 2 inch lifted coils for the rear for $150, and EFS shocks for $95 each.

There was talk about 2nd hand standard Nissan coils but I can't remember the outcome.

Shane on 0409 593 414
4WD STUFF
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

i run 33x12.5x15 mongrels ...no rubing. have 2" body lift and 2" suspension lift. My car is listed in the sig.

The key to not rubbing is getting a different offset rim so the tyre is sticking out more - and of course dont forget to get flares so its all the more legal !
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 13
Joined: Tue Oct 18, 2005 6:08 pm

Post by sx4wdc »

thanks fellas for your help i will post pictures and i am building up my car
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest