Page 1 of 1
what tool do you use to remove head bolts from a 16v
Posted: Sat Oct 29, 2005 6:52 pm
by ZOOK60
The head bolts are 8mm allen key type bolts but they are so tight that i keep either snapping the allen key or twisting the craper out of it.
Is there a special tool that i can use ?
Posted: Sat Oct 29, 2005 6:54 pm
by mud4b
we use a kingchrome tamper proof set.
have not snapped one yet...
Posted: Sat Oct 29, 2005 6:54 pm
by OVERKILL ENG
Just a good quality allen key socket.
Ned one give me a call.
SAM
Posted: Sat Oct 29, 2005 7:00 pm
by cj
The older (don't know about the latest) Kawasaki Jet Ski tool kit has an long 8mm hex that fits a socket nicely for the job. They were used for the cap screws holding the jet units in.
Posted: Sun Oct 30, 2005 11:53 am
by ZOOK60
thanks guys it all sorted i got a sidcrome hex socket for $15 bucks
