Ok please can anyone be 100% that getting a ring and pinion only out of the rear diff of a MQ or Mk that is a H233 will fit straight into the rear diff of a GQ that is also a H233 also what modle of MQ or MK ran 4.625 ratios.Also if you can do this is the spline on the pinion the same diameter and count as that on a GQ 4.2 so that you can swap the pinion flange over
Need to no because a mate just bought a pair of centers out of a 2.8 GQ diesal for the ratios had a reputable diff place change the rear ratios over on to his factory locker but the pattern on them is crap and the diff place recons that they are warped the wrecker he bought them from now wont take them back because they have been played with so looking for a cheap other set of gears can anyone help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Looking for clarifacation on ring and pinions
Who is online
Users browsing this forum: No registered users and 4 guests