Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RESIDUAL PRESSURE VALVES

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

RESIDUAL PRESSURE VALVES

Post by Spartacus »

after swapping from rocky to nissan axles the booster doesnt have enough push to operate the brakes.

Where in brisbane do people stock these? repco autocheap etc..
im chasing 2p for front discs and 10p for drum rear

pleez i need somethin for new years
MULL
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

anybody got an idea of a similar product even?
MULL
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Methinks you need a new master cylinder with a larger bore rather than a residual pressure valve. What are the symptoms? Hard pedal, soft pedal, normal pedal just not enough stopping power?

Dave
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

you need a bigger master cylinder mate
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

Soft pedal that barely works
beanz2 wrote:Methinks you need a new master cylinder with a larger bore rather than a residual pressure valve. What are the symptoms? Hard pedal, soft pedal, normal pedal just not enough stopping power?

Dave

once i removed the old gasket would i be able to weld on larger nissan cylinder if it doesnt fit the bolt pattern?
MULL
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests