Page 1 of 1
RESIDUAL PRESSURE VALVES
Posted: Tue Nov 08, 2005 7:35 am
by Spartacus
after swapping from rocky to nissan axles the booster doesnt have enough push to operate the brakes.
Where in brisbane do people stock these? repco autocheap etc..
im chasing 2p for front discs and 10p for drum rear
pleez i need somethin for new years
Posted: Sat Nov 19, 2005 3:46 pm
by Spartacus
anybody got an idea of a similar product even?
Posted: Sat Nov 19, 2005 5:28 pm
by beanz2
Methinks you need a new master cylinder with a larger bore rather than a residual pressure valve. What are the symptoms? Hard pedal, soft pedal, normal pedal just not enough stopping power?
Dave
Posted: Sat Nov 19, 2005 7:08 pm
by skippy's GQ
you need a bigger master cylinder mate
Posted: Sun Nov 20, 2005 6:03 pm
by Spartacus
Soft pedal that barely works
beanz2 wrote:Methinks you need a new master cylinder with a larger bore rather than a residual pressure valve. What are the symptoms? Hard pedal, soft pedal, normal pedal just not enough stopping power?
Dave
once i removed the old gasket would i be able to weld on larger nissan cylinder if it doesnt fit the bolt pattern?