Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

electric Windows in 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

electric Windows in 80 series

Post by Red Rover »

is it possible to put electric windows from a GXL into a std wind up door configuration?
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

It prolly would be..

But why would u want to...

80's power windows are crap once they git a bit of mud in em.. id rather wind up ones in miine....
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Yes they fit into the door but there is a lot of electrics that go with them im pretty sure the body loom has all the stuff but you would need the door looms for each door and it sould all just plug in. You also need the GXL door trims as the switchs plug into the door handle so to fit the door trim you need the pastic nuts that clip into door were the handle on the door screws into.

My 80ute started as a DX model and i fitted lecci windows.

Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

Thanks, the reason i need to know is because I have a damaged cruider and swapping everything to another and if I get a dx i can swap interiors and electric windows and componants. I thought they were the same shell, just wanted to be sure
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest