Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ideas for GU auto deisel
ideas for GU auto deisel
hi i have a 4.2 turbo deisel which has had turbo and injector pump mods runnig a max of 24 pounds of boost i just destroyed the manual box towing my caravan it is a comp truck and was looking for ideas to put a 4 speed auto in just wondering if anyone has done this what adaptors are avaible and cost i will be doing all mods myself
Your stuck with getting a Auto out of a Patrol, as no one makes adapters to fit any other Auto behide a TD42.
Talk to the boys at http://www.automatictransmission.com.au/ they will put you on the right path.
Talk to the boys at http://www.automatictransmission.com.au/ they will put you on the right path.
Re: ideas for GU auto deisel
If you get one out of a GQ Diesel, its pretty much a straight swap.
Re: ideas for GU auto deisel
Wasn't your GQ an auto?bogged wrote:If you get one out of a GQ Diesel, its pretty much a straight swap.
Re: ideas for GU auto deisel
it is.MQ080 wrote:Wasn't your GQ an auto?bogged wrote:If you get one out of a GQ Diesel, its pretty much a straight swap.
Ive been researching for yonks for the update to 4.2 GU and how to auto it.
MQHOON (mick christie) is the one to speak to, they done a couple of em...
GQ auto
Hi,
Its quite easy to fit an auto to a 4.2 diesel, ive only done it to older td42's, but the blocks are the same in newer ones.
petrol autos will fit, the only modification needed is to drill an extra hole in the bellhousing where the starter fits.
you need to buy a flexplate to bolt the torque converter to, nissan has these as an off the shelf item, was around $200 from memory. (Petrol cranks have different hole pattern, we tried that)
Our auto we used was an electronic one, but we have it wired to run as a manually selectable box so it doesnt change gears when were redlining it in a mudhole!
Give us a call if you need any questions.
Mick, 0296201208
Its quite easy to fit an auto to a 4.2 diesel, ive only done it to older td42's, but the blocks are the same in newer ones.
petrol autos will fit, the only modification needed is to drill an extra hole in the bellhousing where the starter fits.
you need to buy a flexplate to bolt the torque converter to, nissan has these as an off the shelf item, was around $200 from memory. (Petrol cranks have different hole pattern, we tried that)
Our auto we used was an electronic one, but we have it wired to run as a manually selectable box so it doesnt change gears when were redlining it in a mudhole!
Give us a call if you need any questions.
Mick, 0296201208
Chop it drop it and big block it.
Who is online
Users browsing this forum: No registered users and 2 guests