Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EOI: Rear driveline disconnect for GQ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

EOI: Rear driveline disconnect for GQ?

Post by N*A*M »

I have been searching for a way to do front digs with the Nissan running gear. I've been told it is not possible to modify the case to be front wheel drive only. So the other option is to disconnect the rear driveline. There are units available for Suzuki and Toyota cases but nothing for Nissan. They are based off a Remco unit which is used by the RV crowd for flat towing.

So basically, the only option is going custom, with the added costs of R&D and what not. I want to get an indication from all who might be interested in such a unit. It will not be cheap though. As a rough guide, the TrailTough ones retail for about $400 USD. But if you were at Werock, you would've seen how well digs work.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

yep, i'd get one.
it should be made to mount up in place of the handbrake assembly, using the handbrake mounting holes.
doing it that way you should be able to make it so it doesn't change the length of the drivetrain.
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

if this suited a GU aswell i think i would be interested.......maybe. just for bling factor if nothing else....... :armsup:
Top
Posts: 851
Joined: Wed Oct 20, 2004 9:41 am
Location: Caboolture

Post by Troll00 »

Why not just get a Atlas box
http://www.advanceadapters.com/catalog/013.html
The Original Massojet
Check you local 4x4/Ray's Outdoors store for stock NOW
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

If Nissan transfer boxes go into Rovers pretty easily, what's to stop you putting an LT230 into you're Nissan?
Besides the fact that you'd have some pommy crap in you're Nissan! :D
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

The huge handbrake drum of the LT230 might be a problem fitting to a GQ Dave.GQ Gearbox output shaft is fine spline--would need spudshaft to adapt to 10spline TL230 input gear.

Nick
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Davidh wrote:If Nissan transfer boxes go into Rovers pretty easily, what's to stop you putting an LT230 into you're Nissan?
Besides the fact that you'd have some pommy crap in you're Nissan! :D
that's a fiarly big downgrade in strength. i haven't seen inside a rover box, but the difference in just the input shaft size is fairly massive. plus the rover box doesn't give you a true front wheel drive. it is driving off the spider gears in the centre diff, so you are basically always digging in high range. (or half of your low range ratio anyway)
heard of lots of LT230's breaking, i am still yet to hear of anyone breaking a TX12A nissan case.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests