Toyota floaters.

Post by **Dozoor** » Fri Aug 01, 2003 4:54 pm

Can anybody tell me the ID of toy floating rear stubs, 75,60 45 sieries, :lol:

Please.
Larry.

Post by **DIESELDOG** » Fri Aug 01, 2003 9:50 pm

the brother has a 40 with full floaters also a mate with a 55 and so does my 60

Post by **N*A*M** » Fri Aug 01, 2003 10:06 pm

do you need the identity or the internal diametre?

Post by **Dozoor** » Fri Aug 01, 2003 11:13 pm

The internal diameter Nam,

Just assuming these would have a stub with
an orifice of atleast 1.50" or larger , this is the piont where the axle passes thru the wheel bearing you might say.

Post by **bj on roids** » Sat Aug 02, 2003 7:43 am

1.31" is the axle and 30 spline. there is a small riser for the seal and a seal. The material is at its thinnest at the seal location. I doubt you would have room for a 1.5" axle and a seal. :cry:

Post by **Dozoor** » Sat Aug 02, 2003 4:12 pm

Thanks bj ,maybe we'll have to swap it for an O ring hehe.
I'll have to check these out.
Thanks agian.

Post by **bj on roids** » Mon Aug 04, 2003 8:08 am

what sort of axle have you got that is 1.5" in diameter?

Outer Limits 4x4 Board

Toyota floaters.

Toyota floaters.

Who is online