Toyota floaters.
Posted: Fri Aug 01, 2003 4:54 pm
Can anybody tell me the ID of toy floating rear stubs, 75,60 45 sieries, 
Please.
Larry.
Please.
Larry.
Page 1 of 1
Posted: Fri Aug 01, 2003 9:50 pm
the brother has a 40 with full floaters also a mate with a 55 and so does my 60
Posted: Fri Aug 01, 2003 10:06 pm
do you need the identity or the internal diametre?
Posted: Fri Aug 01, 2003 11:13 pm
The internal diameter Nam, 
Just assuming these would have a stub with
an orifice of atleast 1.50" or larger , this is the piont where the axle passes thru the wheel bearing you might say.
Just assuming these would have a stub with
an orifice of atleast 1.50" or larger , this is the piont where the axle passes thru the wheel bearing you might say.
Posted: Sat Aug 02, 2003 7:43 am
1.31" is the axle and 30 spline. there is a small riser for the seal and a seal. The material is at its thinnest at the seal location. I doubt you would have room for a 1.5" axle and a seal. 
Posted: Sat Aug 02, 2003 4:12 pm
Thanks bj ,maybe we'll have to swap it for an O ring hehe.
I'll have to check these out.
Thanks agian.
I'll have to check these out.
Thanks agian.
Posted: Mon Aug 04, 2003 8:08 am
what sort of axle have you got that is 1.5" in diameter?