Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEED HELP - 2L SWAP FOR 3L

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

NEED HELP - 2L SWAP FOR 3L

Post by the plough »

I am in the process of swapping a 2L for a 3L in my 1984 hilux when i noticed that the fly wheel on the 3L is 50mm thicker (5cm) than that of the 2L, and also clutch is same size but different bolts holes slightly...

Is this is problem that will affect anything or will it all just fit and be nice to me??
Top
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Post by the plough »

sorry got a bit carried away with the typing, it is only 5mm thicker
Top
Posts: 71
Joined: Tue Feb 24, 2004 11:16 am
Contact:
Contact dandownunder

Post by dandownunder »

I know when the clutch went on my 2.4Surf I had a new Clutch put in and a flywheel from a 3L, they needed some longer bolts to put it in, but it worked, apparently this is common practise with the surfs, as the dual mass flywheels aren't worth fixing.
Let us know how you go
cheers
Dan.
Top
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Post by the plough »

After going back and getting the right clutch plate we found that its thickness was smaller to compensate for the extra 5mm on the fly wheel....so basically i had the wrong clutch plate/pressure plate extra
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest