Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vacuum H4 engagement

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Vacuum H4 engagement

Post by V8 Middy »

Are the solenoids for vacuum engaged 4WD the same from a 4-Runner as a cruiser?

Will they plug straight into the loom or will I have to hack the wiring?

Need to replace mine (in the FJ73) cos they burnt along with everything else and the wreckers only have the 4-runner ones.

Thanks
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 7
Joined: Tue Aug 23, 2005 11:13 pm
Location: At the outer limits of the planet

Post by 13BT »

First is your BJ 73 12 volt or 24volt?
CRAFT
C ant
R emember
A
F ucken
T hing
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Toyota solenoids are very similar in function but may differ in inlet and outlet location or the mount. You can get a VSV (vac. switching valve) from a Camry, Celica, etc. and make it work in the cruiser.

Dave
Top
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

V8 Middy they should be exactly the same as the ones on that LX bundy I am wrecking. It has the push button transfer (H4) i am not exactly sure what it is you are after but it is all complete. I can send you pics if you want? You want it?


Bundy_Harry
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

I'm after the H4 button off the dash and the solenoids and piping from under the bonnet.

You have a PM re. photos of the tub too.

Thanks
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest