Page 1 of 1
Vacuum H4 engagement
Posted: Mon Nov 28, 2005 12:30 pm
by V8 Middy
Are the solenoids for vacuum engaged 4WD the same from a 4-Runner as a cruiser?
Will they plug straight into the loom or will I have to hack the wiring?
Need to replace mine (in the FJ73) cos they burnt along with everything else and the wreckers only have the 4-runner ones.
Thanks
Posted: Sun Dec 11, 2005 10:08 pm
by 13BT
First is your BJ 73 12 volt or 24volt?
Posted: Mon Dec 12, 2005 1:58 am
by beanz2
Toyota solenoids are very similar in function but may differ in inlet and outlet location or the mount. You can get a VSV (vac. switching valve) from a Camry, Celica, etc. and make it work in the cruiser.
Dave
Posted: Mon Dec 12, 2005 8:50 am
by Bundy_Harry
V8 Middy they should be exactly the same as the ones on that LX bundy I am wrecking. It has the push button transfer (H4) i am not exactly sure what it is you are after but it is all complete. I can send you pics if you want? You want it?
Bundy_Harry
Posted: Mon Dec 12, 2005 11:55 am
by V8 Middy
I'm after the H4 button off the dash and the solenoids and piping from under the bonnet.
You have a PM re. photos of the tub too.
Thanks