Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need a new powerstreering pump and lower ball joints

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 9
Joined: Tue Jan 21, 2003 8:42 pm
Location: brisbane.qld.au

Need a new powerstreering pump and lower ball joints

Post by Orange »

I am told that the front lower ball joints of my 1993 v6 4Runner are shagged and I need some new ones. I rang Super Cheap and they quoted me 2 new ones for $117 .. anyone have any other suggestions.

Also my car is pissing power steering fluid everywhere, and I am told it's most likely the power steering pump, anyone know of a good replacement? Should I get new, 2nd hand, reconditioned? Can someone recommend somewhere good to do the work in Brisbane also?

Any help would be appreciated.

Ben
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

For $200 bucks I got my landcruiser pump stripped down and checked with all new seals ect and tested.As long as they are not doing anything weird or making horrible noises you should have no problems. Putting other pumps or 2nd hand ones is more trouble than its worth unless its a purpose built offroader/rock crawler.Before you take it to anyone clean it with degreaser and find the leak by having someone turn the steering while you watch. It maybe the connections or a damaged reservoir. When you found someone take it off yourself and take it to them.My landcruiser pump comes off in about 4 minutes.
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

Benny,

Before you rebuild the steerin box pump thingy whatchoocallit..
There is a product that DOES work in fixing leaks in these areas..
Why.. it worked on my 75 ute on the box...it was dripping constantly thats how bad it was...

Go see Warren (Wogga) at bp virginia (cnr pritchard and sandgate rd)and tell him punchy (scotty) sent you, and ask him to wack in some of that stuff he stuck in my 75 ute to stop it leaking...i think you will be pleasantly surprised. and finacially better of for some time !

As for the ball joints..that cheap...grab them with both hands.
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Posts: 9
Joined: Tue Jan 21, 2003 8:42 pm
Location: brisbane.qld.au

Post by Orange »

I ended up getting some lower BJ's from Thompsons ... better brand then Supercheap and they were $120 for the pair.

I was quoted $350 to fully rebuild the pump, and flush the whole system out, so I think I might go for that.

Thanks for the help .. and we gotta catch up once it's all fixed punch.
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

yeah sure thing dood..

I've gotten a little more crazy with my driving as of late...must be something to do with the fact i freqent the outerlimits forums i dunno :P
but if you like it rough..

for example last weekends efforts.



Image


WE'LL DO LUNCH!
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest