Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3inc body lift

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 116
Joined: Sat May 14, 2005 11:55 am
Location: Murrumba Downs, Queensland

3inc body lift

Post by dazzsbuggy »

i want 2 do a 3inc body lift on my 1984 pajero has any 1 don it
what needs 2 be don 2 make it fit
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

A lot of guys on here are running 2" body lifts and there is plentiful info in the bible at the top of the forum.

Is there a specific reason that you want to go so high ?
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Fitted a 2 inch lift this arvo not a problem (on a Triton)

While I was at it I chocked it up an extra inch but the seem too much bother
Steer shaft lenght, brake line length are going to be a prob with 3 inch
Most 4x4 shops sell shaft extensions though

I have also read , in this forum, if yo go 3 inch the gear lever fouls on the transmision tunnel and knocks it out of first, not good when rock crawling

cheers
wayne
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest