Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2F Making a racket

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 43
Joined: Sun Jul 27, 2003 3:47 pm
Location: central coast NSW

2F Making a racket

Post by DIESELDOG »

A mate of mine has an old cruiser that has just developed a knocking noise in the motor [2f] its definatly not bottom end sounds more like a drivetrain noise,have adjusted valve clearances, no difference.Am thinking it could be a lifter,cam bearing? any advice would be appreciated.

ps. it only does it under load

Shayne
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

my uncle 2f did the same sort of thing what happened to his was the crank pulley bolt had come loose and the woodruff key had come out. wasnt total stuffed. new bolt washer and key and it fix the problem
Top
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

How long is a piece of string...

This is the question is it not....

You see my point... :finger:
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests