Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series clunk

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

80 series clunk

Post by ratboy »

80 series clunk when u let the clutch out if i fit a part time kit from marks 4x4 conversion will this get rid of the clunk
ok it was me
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

More info needed, what mods have you done, is it a single clunk....................
Top
Posts: 17
Joined: Fri Nov 26, 2004 7:20 am

Post by VinVin »

yeah it sounds like backlash to the front driveshaft
1992 80 Series Cruiser 4.2D-Lift-Tires-Lights-Winch-Snorkel-UHF-Dual Batts..need locker :(
Top
Posts: 2660
Joined: Sun Oct 31, 2004 2:55 pm
Location: Regents Park

Contact:
Contact kroozer91

Post by kroozer91 »

sounds like the thrust washers

my 80 has this noise aswell
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

Post by ratboy »

bruiser wrote:More info needed, what mods have you done, is it a single clunk....................
no mods at all seems like back lash in drive train just one clunk when letting clutch out
no clunk in hi or low 4x4
i want to fix it as its the only fault with the car
ok it was me
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Full time 80 series especially pre-1995 tend to wear out the hub drive flange on the front CV which is why you hear a clunk when you put it in gear. In 1995 they went to a longer splined model to reduce the problem. Replace the drive flange and see if the clunk goes away.

Dave
Top
HJ60_HEATHUS
Banned
Posts: 279
Joined: Wed Dec 15, 2004 7:26 pm
Contact:
Contact HJ60_HEATHUS

Post by HJ60_HEATHUS »

maybe you're letting the clutch out too fast.

back lash can also be noticed when you get on and off the throttle
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests