Hey Guys,
Ive just got myself some crawler gears, and would like to replace any bearings / seals in the transfer while im at it. I was just wondering if anyone has done this and where they got it from ? Is there a 'kit' i can buy with everything i need in it ?
Any ideas would be greatly appreciated.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Trasfer Case Bearing and seal kit ??
Re: GQ Trasfer Case Bearing and seal kit ??
have a search. Wendle listed all the bearing numbers for me once in the past.Draven wrote:Hey Guys,
Ive just got myself some crawler gears, and would like to replace any bearings / seals in the transfer while im at it. I was just wondering if anyone has done this and where they got it from ? Is there a 'kit' i can buy with everything i need in it ?
Any ideas would be greatly appreciated.
Thanks
arr after much searching i found the part no's..
For anyone else heres the copy of the copy of the post
Taken from Wendle's write-up. I'm not taking credit for this. Just so happened that I was looking back at page 101 and found the page so I copied it for you.
Cheers
Anyone planning on ever re-buidling a Nissan T/Case for different gears or whatever, cut & paste this so you can buy all the shit before you start.
I got oil in my eye holding one of the seals up to the light to read the miniscule numbers off of it, so be grateful The Finger
Don't bother with Nissan, they won't sell the individual bearings to anyone off the street, only a full t-case reco kit ($)
Bearings:
6212NC3 (NTN)
6208C3 (NTN)
TM207 (NSK)
6306 (2x) (NTN)
6208ZC3 (NTN)
6213Z (NSK)
Seals:
15 Z 50 72 12 AE (Input)
15 Z 50 72.5 19.5 AE (Rear output)
15 Z 40 75 17.9 AE (Front output)
EDIT: Had the rear output diameter wrong. changed from 60mm to 50mm
For anyone else heres the copy of the copy of the post
Taken from Wendle's write-up. I'm not taking credit for this. Just so happened that I was looking back at page 101 and found the page so I copied it for you.
Cheers
Anyone planning on ever re-buidling a Nissan T/Case for different gears or whatever, cut & paste this so you can buy all the shit before you start.
I got oil in my eye holding one of the seals up to the light to read the miniscule numbers off of it, so be grateful The Finger
Don't bother with Nissan, they won't sell the individual bearings to anyone off the street, only a full t-case reco kit ($)
Bearings:
6212NC3 (NTN)
6208C3 (NTN)
TM207 (NSK)
6306 (2x) (NTN)
6208ZC3 (NTN)
6213Z (NSK)
Seals:
15 Z 50 72 12 AE (Input)
15 Z 50 72.5 19.5 AE (Rear output)
15 Z 40 75 17.9 AE (Front output)
EDIT: Had the rear output diameter wrong. changed from 60mm to 50mm
I dont have them ... after talking to several people, I thought against it.Draven wrote:Just curious bogged, i read that you were going to get someone else to install the crawler gears for you. Would you be able to recommend them ?
Normal low range is reallly useful for some areas I travel, and LOW low would be annoying - revving going nowhere FAWKIN SLOWLY.
Who is online
Users browsing this forum: No registered users and 2 guests