Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80's shocks in bundy

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 96
Joined: Sat Nov 20, 2004 2:38 pm
Location: Newcastle

80's shocks in bundy

Post by Syzygy »

was hoping to use them with the 80 series front coils but found this...
Bundytime wrote:use 80 series shockers for more travel........ except the right hand rear....

cheers Daniel
Is the shock too long for the right rear?
or is there another reason?
1986 2L-T Bundera
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Heh? Dunno! I bought my LJ70 (bundy) and it had 80's springs fitted all round. No real problem but I changed them all after a few weeks anyway.
Top
Posts: 85
Joined: Wed Apr 13, 2005 11:49 pm
Location: Townsville

Post by V6 Bundy »

I can see no reason why the 80# front spring wont fit into the bundys rear right. It has the same size mounts in the chassis and on the diff housing.
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

The original question related to shocks not coils, the Bundy uses eye bottom and pin top mounts on all but the right rear shock which is eye-eye (captain :) ) I think that is where the problem is (I don't know what attatchment styles the 80 uses).
Peter
Top
Posts: 85
Joined: Wed Apr 13, 2005 11:49 pm
Location: Townsville

Post by V6 Bundy »

droopypete wrote:The original question related to shocks not coils,
Peter
Whoopsy! :?
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

Anyway there is no problem. I run front 80 coils all around, and front 80 shocks too.
You'll just have to weld in some sort of "pad" where upper shock mount (pin) goes through.
'90 Y60 TD42
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests