Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brissie Engineering Shops

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Brissie Engineering Shops

Post by beebee »

Anybody know of an engineering shop on the north side of brisbane that could reverse my rim centres? Is this something that any old workshop could do?
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

RACE ENGINEERING. Jijaws st sumner park, quality work from this shop.

glen
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I got mine done by a guy on the north side who works under his house - quality job (no leaks, balanced well, etc), and cheaper than RE quoted. PM Ross (The Lifter - from this board) for the guy's details.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 449
Joined: Sat May 24, 2003 6:02 pm
Location: Boomtown

Post by becky »

Matchless Industrial Maintenance at Banyo do alot of our engineering. They are one of the silent machine shops for Stone Brothers & Cat V8 Supercar teams & also do alot of rigging work for world class racing yachts. Just mention Chad with the suzuki.
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Race Engineering!

I got my rims i used to use with the Boggers offset there!

They were perfect and ran true!

Nice welds and very cheap!

I have seen other rims that have been done and none look as neat as these were!
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Thanks for everyone's help. I have found a place with BJ's help :D
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests