Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2f blowby and other problems

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

2f blowby and other problems

Post by pcman »

ok my 2f is annoying me ive got massive amounts of pressure building up in the sump enough to blow the dipstick out then oil follows

im also getting a milky oil/water mix on the inside of the rocker cover

oil in the sump is dirty but no water

head gasket was fine as i ripped the head off today


anyone got any ideas
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

cracked head especially if the gasket was ok
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

yep planing on getting the head tested this week
Top
Posts: 45
Joined: Fri Nov 04, 2005 9:08 pm
Contact:
Contact andrewfarmer

Post by andrewfarmer »

check for broken rings
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest