vibration problem in serria
Posted: Mon Dec 12, 2005 7:19 pm
has any one had vibration problem in there serria at low speed 0-20k and then when you take you foot off at 80+k put the foot back down instantly goes away or at least 95% of it
I have checked the transfer and it is fine gearbox has just been checked out and is a litte worn in the bearings but still has plenty of ks in it acording to my gearbox place. Unis where all replaced less than 10thou ago and are all in good nic but there is a little bit of movement in the drive shart splines but not sure how much is too much. Diff have just been reco with my new lockers with all new wheel bearing
ANY IDEAS WERE TO LOOK NEXT as i think it is either in the drive shafts or engine
HELP PLEASE
I have checked the transfer and it is fine gearbox has just been checked out and is a litte worn in the bearings but still has plenty of ks in it acording to my gearbox place. Unis where all replaced less than 10thou ago and are all in good nic but there is a little bit of movement in the drive shart splines but not sure how much is too much. Diff have just been reco with my new lockers with all new wheel bearing
ANY IDEAS WERE TO LOOK NEXT as i think it is either in the drive shafts or engine
HELP PLEASE