Outer Limits 4x4 Board

hi, thinking its time to do a bodylift on my 94 d/c lux. i used solid alloy on my last lux,84 model. would that be my best bet again or is there other options. the bible has a few ideas,but not much help. ALSO i didnt have to mod anything on my last lux, would my new one be the same or not??? would be great for some feedback.thanx

i saw some heavy duty nylon sorta stuff here for $13.30 for 100mm??????

Turbo Tonka wrote:hi, thinking its time to do a bodylift on my 94 d/c lux. i used solid alloy on my last lux,84 model. would that be my best bet again or is there other options. the bible has a few ideas,but not much help. ALSO i didnt have to mod anything on my last lux, would my new one be the same or not??? would be great for some feedback.thanx

i saw some heavy duty nylon sorta stuff here for $13.30 for 100mm??????

You only want to go 2"?

If so then yeh not alot to worry about, just remember to undo you steering shaft bolts so it can slide freely whilst you jack up the body. Also look at modding the bumper or bullbar coz it will look a touch silly if you dont match it back to the body.

yeah only 2 inch, sounds exact the same as my last lux then, just thought id check with the new model. i havent got a bullbar yet,still a standard bumper. i left it a while because of this. Thanx anyway,big help.

I use alloy on my b/l on my 80.. definatly pefer that over the poly stuff...

u can git real hard pooly stuff i know but it prolly costs more than the alloy anyway

hey again, it just said on another link that the fan has to be moved and so on, the shroud???? that right?????????????thanx. i only wanna go 2 inch, on my older lux i didnt change anything.

Turbo Tonka wrote:hey again, it just said on another link that the fan has to be moved and so on, the shroud???? that right?????????????thanx. i only wanna go 2 inch, on my older lux i didnt change anything.

You can just take off the lower part of the fan shroud.
You will lose a slight bit of cooling efficiancy but usually not enough to be a problem.

ausyota wrote:

Turbo Tonka wrote:hey again, it just said on another link that the fan has to be moved and so on, the shroud???? that right?????????????thanx. i only wanna go 2 inch, on my older lux i didnt change anything.

You can just take off the lower part of the fan shroud.
You will lose a slight bit of cooling efficiancy but usually not enough to be a problem.

Could you just drop the whole Rad 50mm ???

Dougster wrote:

ausyota wrote:

Turbo Tonka wrote:hey again, it just said on another link that the fan has to be moved and so on, the shroud???? that right?????????????thanx. i only wanna go 2 inch, on my older lux i didnt change anything.

You can just take off the lower part of the fan shroud.
You will lose a slight bit of cooling efficiancy but usually not enough to be a problem.

Could you just drop the whole Rad 50mm ???

You could.
Or you could drop the shroud down.
Or you could do a 2" drivetrain lift.
Or you could do the easy dodgy way and just unbolt the lower part of the shroud.

Paul.

thanks for that, all sorted than hey. because im a lasy bastard ill probly go with the lower part just getting removed. or when the time comes i might surprise myself and do it properly.thanks anyway. matt

oi turbo tonka r u matty apps? neway bud cant wait to see it with the bod lift, i got 2" polly bod blox and they work a treate

uhmw plastic is great - plus you dont get the corrosion issues of alloy

oi turbo tonka wats wrong with using quickies polly blocks..... and if hes is makein em to soft get up em but makin a harder compound