Outer Limits 4x4 Board

I have an Aisin 4 speed automatic with model no. 03-72LE. It's out of a Vitara. I wish to run a Sierra transfer case. With the Vitara transfer case removed the output shaft has no support. Does anyone know what other model Aisin with I can adapt to the back of my automatic gearbox to give the output shaft support?

MacGyver

Mick, it is a very comon gearbox, lots of Toyota's and Mitsubishi's, usualy vans have a shorter output's than cars.
Peter.

Mick wrote:I have an Aisin 4 speed automatic with model no. 03-72LE. It's out of a Vitara. I wish to run a Sierra transfer case. With the Vitara transfer case removed the output shaft has no support. Does anyone know what other model Aisin with I can adapt to the back of my automatic gearbox to give the output shaft support?

MacGyver

Let me know I'd be interested in this one too as was looking at the Sierra transfer case route, but on a manual.

Need some way of bringing down gearing in both high and low. With the pass through high on the Vitara transfer case a Sierra transfer case swap looks like the best option, especially since i may be swapping axles at some point so a Ring and Pinion swap may be only temporary.

why dont you just make a support bearing in the front plate of the tranfer case thats all i did works fine

Why dont you just come back to sydney, we miss you both!!
hows the truck looking now? any different?? Hi Nean!!