Page 1 of 1
tb42 efi dissy
Posted: Thu Dec 29, 2005 9:02 pm
by tuf045
wondering if anyone knows whether a dissy out of tb45 will fit in tb42?
have been looking for efi tb42 one for a while hard to come buy.
so if the tb45 one fits will make efi conversion easier.
cheers
Posted: Thu Dec 29, 2005 10:07 pm
by awill4x4
TB45E's don't run a coil like the TB42E's so they may well be running some type of crank fired ignition on those. I don't think they'll fit the TB42E.
Regards Andrew.
Posted: Fri Dec 30, 2005 7:08 pm
by krimnl
the TB42 efi dissys arnt that good and are hard to come by , if your doing a efi conversion what ecu are you running ?? might be worth looking at coil pack or JPC do a bosch dissy conversion for the patrols.
ecu
Posted: Fri Dec 30, 2005 10:20 pm
by tuf045
krimnl wrote:the TB42 efi dissys arnt that good and are hard to come by , if your doing a efi conversion what ecu are you running ?? might be worth looking at coil pack or JPC do a bosch dissy conversion for the patrols.
lookig at running either ems 8860 or mirotech ?
Posted: Sat Dec 31, 2005 1:34 pm
by krimnl
i would reccommend going for a AUTRONIC ecu , there are a lot of people using them now and are proving to be very reliable.
speak to Mark at JPC about a distributor , he made mine and i havnt had a problem with it , unlike the factory unit that gave me heaps of problems .
Posted: Mon Jan 02, 2006 6:36 pm
by tuf045
krimnl wrote:i would reccommend going for a AUTRONIC ecu , there are a lot of people using them now and are proving to be very reliable.
speak to Mark at JPC about a distributor , he made mine and i havnt had a problem with it , unlike the factory unit that gave me heaps of problems .
cheers thanks.