steel

[matthewK]

im looking for a decent but cheap joint to get some steel to buld some slider for the patrol

i see a few but im unsure who sell to public and who do not

in melbourne?

thank

[spazbot]

most places with seel direct to the public, just call em ask is they have a trade counter and if they take cash ?
also if cut lengths are avail as some of the bigger places like horan wont cut lengths for ya.

[lux kid]

i know of two joints in the south east. one in keysborough call surdex, they are a whole sale place you have it in lenghts of 8 meters our so.
or there is lockbar steel in moorabbin they have evey thing and will cutt to sizes. don't know about prices but.

lockbar :95848777
surdex: 97981177

[droopypete]

Where are you located?
Peter.

[christover1]

RP steel in Bayswater sell direct to public, and cut to length, price per cut is charged of course.
Scrap bits are sold off by the weight, tho smallish bits are often "a dollar will do, etc "
always done right by me, anyway
christover

[45punkbus]

robot trading collingwood sell direct to public, dad use to work there and use to cut stuff to size but im not sure if they were suppose to or not.

[Hamo]

there's a couple of place's in hallam on hallam rd they sell direct

[matthewK]

im in doveton ,

i wanna start woreking out what i need prices etc

to build some sliders:) im thinking 50-60 mm round with a say 3.2 wall


just wanna get rid of the crappy factory steps on there

matthew

[Hamo]

Hallam.s about 5 mins from you then turn right from princess hwy at the hallam pub

[droopypete]

Country steel in Hallams Rd, (just before the train tracks)
they will cut it to length, their prices are OK and are good guys.
if you want real cheap steel go to Australian steel in Abbots Rd Dandy, they are real cheap, but don't like cutting to size (and given the small amount you will want, you would be better off at Country steel)
Peter.

[N*A*M]

www.steelsolutions.com.au is okay. you can order online. they cut it up and you pick up or they deliver for $30. not the cheapest or the best range but very convenient. i've always dealt with malouf steel and they've been good. the east side outlets should be pretty good to.

[defender kev]

Country steel in Hallam like the others said are pretty good 40mm Nominal Bore x 3.2mm pipe is about $55 for a 6.5metre length.
Also Melsteel in Hallam i'm pretty sure they are a little cheaper and will also cut to size..

[84ZOOKSTA]

Springvale steel supplies in clayton. thats where i got my steel from to make my sliders and they are good guys and are the cheapest i have found.

Cheers
Simon.

[matthewK]

silly question how much stell is required do guys reacon for lwb