Outer Limits 4x4 Board

check
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11054

for daisys thread,

which also leads on to this hread about the rebuild,

here http://www.outerlimits4x4.com/PHP_Modul ... 256#283256

u want to buy a 4.2 supercharged barnsey?

no just the motor bored with it ... needs more powah!

engine/engine mounts, box and zaust
should be pretty straight forward

i got no idea about the 2.8s ... all i know is they're POS in the patrol ...
small engine heavy car

no substitute for for a bigger motor

barnsey wrote:I wanted a 4.2, but this Patrol came up at a good price, and it's 100% immaculate. I'm thinking down the track, I'd like to do a transplant

So your already talking about spending $5k-10 modding it... Wouldnt you have been better off waiting and buying a 4.2 in the first place instead of rushing into it?

barnsey wrote:

bogged wrote:

barnsey wrote:I wanted a 4.2, but this Patrol came up at a good price, and it's 100% immaculate. I'm thinking down the track, I'd like to do a transplant

So your already talking about spending $5k-10 modding it... Wouldnt you have been better off waiting and buying a 4.2 in the first place instead of rushing into it?

Strictly hypothetical at this stage........

No, Bogged.

So what your saying is, your happy with the power? no, your saying your unhappy with it
Not as bored as I was in the Tableland a few weeks ago having to climb hills in 2nd gear.

So really even though your talking Strictly hypothetical at this stage........ what your really saying is your unhappy with the power, and want more, so you should have waited and got the 4.2 or other donk in the first place - correct?

have a nice day

barnsey wrote:Fark off to bed, Bogged

Its an easy swap but leaving the 4.6 gears in it will make the 4.2 rev at about 2650 at 100 in 5th Also you can keep the shafts if you keep the same transfer I kept mine as the outer part of the flange is smaller and wont get knocked around as much on rocks and the likes. Also a good sparky can wire the glow plug timer from the 4.2 into the 2.8 computer module (in the drivers kick panel) If you change the transfer then just change the flanges and handbrake drum to the new transfer. If you get a complete motor make sure the trottle cable and hand throttle cable is with it as they are diffrent If ya got any other Qs just shoot me a Pm as i did the swap in mine about 2 years ago and wow what a diffrence(i got a shwitzer turbo as well) and never looked back (hence not2.8)
Cheers Jamie H

Hoonz - you have a PM