Page 1 of 1
Coverting from carby to EFI on G13B
Posted: Thu Jan 05, 2006 10:54 am
by shezzbeav
Hi there,
I've got a G13B engine for my zook, however, I was wondering if it was possible to covert it from carby to EFI?
Has anyone done it before? What are the costs of the conversion?
Thanks in advance.
Posted: Thu Jan 05, 2006 10:40 pm
by Gutless
sure is possible. just sell your G13B and buy a G13BB out of a jimny. Factory EFI, and it bolts into a sierra.
Posted: Fri Jan 06, 2006 9:34 am
by mud4b
as above i would have to agree with gutless..
but if you dont want to go that way you can get the single point injection from either a vitara or a sierra both being imports(or a very very limited no from aus)cost can be anywhere from a few hunge to over $1000 depending on what is available,what you need and what they feel like charging at the time.
i wired up a loom for RHETT from a mazda bubble car. rhett did have to make a adaptor plate to fit the throttle body onto the sierra manifold but said it was not too hard. this only cost him around $300 (labour not inc.) from memory and goes like stink.
Posted: Fri Jan 06, 2006 6:12 pm
by Zookified
Posted: Fri Jan 06, 2006 6:14 pm
by largesuzy
teh bible is ur friend