Page 1 of 1
Question on Mods in NSW after engineers cert.
Posted: Mon Jan 09, 2006 5:22 pm
by Nev62
In NSW there is no restiction on the engine size for 4WDs. If you already have a engineers cert and then go up in engine size, do you have to get the whole vechicle re-engineered or just the new engine? (no plans but as an example from 6.5lt to 7.2lt)
Posted: Mon Jan 09, 2006 6:32 pm
by MissDrew
Just the engine.
My hilux was engineered before I dropped the 1uz in it. When I had the motor swap engineered he didn`t care about the other stuff that was allready done. But he did need a copy of the original report. If you can`t produce a copy of the original report then you would have to have everything else re-engineered.
Posted: Tue Jan 10, 2006 5:29 pm
by udm
You go bigger engine... wouldn´t an engineer want to check out things like your brakes system to make sure they suit the engine?
Posted: Tue Jan 10, 2006 5:48 pm
by MissDrew
yes.
Posted: Tue Jan 10, 2006 9:14 pm
by RockyF75
6.5lt aint enough for ya
Posted: Wed Jan 11, 2006 5:57 am
by Nev62
RockyF70 wrote:6.5lt aint enough for ya
6.5 is fine, I was asked a question more on the engineering side and was not sure.