Page 1 of 1
bar from seat belt to tub
Posted: Tue Jan 17, 2006 5:03 pm
by germo
I need a picture of a stock bar that runs from the seat belt into the rear tub.
the engineer is wanting me to put one in that is an inch diameter, and I can't work out how I am going to get it in there.
and I don't have stock bars to look at.
this is the best pic, I could find.
but if someone with a digi can take a few snaps of theirs and show me, that would be awesome!
Posted: Tue Jan 17, 2006 5:27 pm
by midnight
Posted: Tue Jan 17, 2006 5:30 pm
by nicbeer
I am guessing this is legal as i have done similar when mounting my cargo barrier from the back of the top seatbelt mount. thinking this is the stongest point apart from bolting through the whole body.
thanks
Nic
Posted: Tue Jan 17, 2006 6:04 pm
by germo
that is awesome, thanks!
I wondered how they tucked back in behind the seat belt!
I think I will just get a stock one and modify that.
another question
what is the diameter of the bar?
thanks heaps ashley
Posted: Tue Jan 17, 2006 7:26 pm
by midnight
The bar is about 1''. I cant be bothered going and measuring it
.
But about 1'' or smaller.
Anything else I can help with.
Chris
Posted: Tue Jan 17, 2006 10:58 pm
by spamwell
coilies don't have them, whats the deal!
Posted: Wed Jan 18, 2006 1:40 pm
by midnight
They should do, as the hoop behind the seats is a main rollover protection point, and that bar is to strengthen it.
Posted: Wed Jan 18, 2006 1:47 pm
by inka
maybe the solid front windscreen surround affects this on the coilies
