Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel offset - 35z on a 60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Wheel offset - 35z on a 60

Post by Sixty's Guy »

I am seriously considering doing a 2" bodylift to go with my 3" spring lift and putting 35z under the HJ60. What size offset will I need on the wheels? I take it that the wheels will be 15x8.

And anyone know it the Superior Engineering bodylift kit is ok?
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 541
Joined: Sun Sep 28, 2003 5:04 pm
Location: in the shower..

Post by carts »

-28 offset will do ya.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

not sure about the figure, but standard 8" rims to suit a 60 (off the shelf) work fine
Damian.

should I swim it first ?
Posts: 37
Joined: Thu Jun 03, 2004 9:55 pm
Location: Newcastle

rim offset

Post by suzi chick »

mate i just got 2 inch offset on my sunnies for a cruiser and there sweet
i got about 10 inch lift on mine and 2 inch body lift is easy to do ya self
takes about 2 hours and i had to cut the bottom of the fan cover thing off
and longer bolts of cource i got a steel bloke to cut sloid alloy block's for me
cost $70 for 12 and $50 for the bolts and $50 for the case of bourbon of cource
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest